2023 Wubota Combine Harvester Maintenance in Bangladesh
2023 Wubota Combine Harvester Maintenance in Bangladesh

Wubota Combine Harvester Maintenance in Bangladesh

A combine harvester is an expensive piece of equipment essential for farmers to harvest their crops. However, without proper maintenance, the combine harvester can quickly become inefficient and break down, causing delays during the harvest season. That’s why Wubota goes to the local area to provide after-sales service, telling farmers what they need to know and how to maintain and adjust their combine harvesters to ensure they run at peak performance. This is the ultimate guide to combine maintenance and tune-ups.
The hydraulic system
Check the hydraulic fluid level regularly and replace it as needed.
The threshing
Check it regularly. Replace any worn or damaged parts immediately.
Check the engine
Check the oil and coolant levels regularly, and replace the oil and coolant as needed.
Operating dashboard
Clean the operating dashboard regularly, check for any damaged parts.
check the engine
Replace the air filter every 200-300 hours of operation, or more frequently if operating in dusty conditions.
header height
Adjust the header height to ensure that it is level with the ground and that it is not digging into the soil
cutting and threshing components
Check the header reel, concave, cylinder, and separator for wear and damage.
engine compartment
Clean the engine regularly to prevent debris buildup and ensure that the engine operates efficiently.

Adjust the Combine Harvester for Crop Conditions

By conducting regular maintenance checks, you can identify and address any issues before they cause major problems. To keep your combine harvester operating at peak performance, regular maintenance checks are essential. Some of the key areas to check during routine maintenance include!
The reel speed
Adjust the reel speed to match the crop conditions. For heavy crop conditions, increase the reel speed, and for light crop conditions, decrease the reel speed.
The concave clearance
Adjust the concave clearance to match the crop conditions. For small grains, such as rice use a tight concave clearance, wider concave clearance for for large grains.
Header coplanarity inspection
Adjust the cylinder speed to match the crop conditions. For tough straw, increase the cylinder speed; for easy threshing crops, decrease the cylinder speed.
The electrical system
Check circuit, check the battery's condition and ensure that it is charged. Check the wiring for any damage or wear and replace it as needed.

Combine Harvester Parts That Need Maintenance

Check Belts
Check Belts
Belts can wear and stretch over time, causing them to slip or break. Regularly check the belts for wear and replace them as needed.
Check Bearings
Check Bearings
Bearings can wear out over time, causing the parts they support to fail. Regularly check the bearings for wear and replace them as needed.
Check Augers
Check Augers
Augers can wear and become damaged over time, causing them to become less efficient. Regularly check the augers for wear and replace them as needed.
Check Feeding Chain
Feeding Chain
Chains can stretch and wear over time, causing them to break or slip. Regularly check the chains for wear and replace them as needed.
Store the Combine Harvester

Store the Combine Harvester Properly

  • Clean the combine harvester thoroughly before storing it to prevent debris buildup
  • Store the combine harvester in a dry, secure location to prevent damage from weather or theft.
  • Drain all fluids and replace them with fresh fluids before storing the combine harvester to prevent contamination and ensure that the fluids are fresh for the next season.
  • Store the combine harvester with the header at ground level to prevent damage to the header and feeder house.

By storing the combine harvester properly, you can prevent damage and ensure that it is ready to use for the next harvest season.

Wubota Cares About Your Field

In conclusion, proper maintenance and adjustment of your combine harvester are essential to ensure that it operates at peak performance and maximizes yield. Conducting regular maintenance checks, adjusting the combine harvester for crop conditions, cleaning the combine harvester regularly, and storing the combine harvester properly are key steps to ensure that it operates efficiently. Additionally, maintaining and replacing key combine harvester parts, such as belts, bearings, chains, augers, and blades is essential to keep your combine harvester running smoothly, By following these above-mentioned tips. you can ensure that your combine harvester operates efficiently and maximizes your harvest field